Mount Torque Shaft - Siemens Milltronics MWL Weight Lifter Operating Instructions Manual

Installing/Mounting
4.2 Installation procedure
4.2.3

Mount torque shaft

1. If lifting arms are not in the raised position, rotate the input shafts until both units have
reached the mechanical stop.
2. Place the torque tube over the connecting shafts of the left and right crank bodies.
3. Loosely install the bolts, nuts, and washers that hold the torque tube onto the connecting
shafts.
4. Hand tighten the bolts, nuts, and washers that mount the crank bodies to the stringers.
5. Hand tighten the bolts, nuts, and washers that hold the torque tube onto the connecting
shafts.
①
②
③
④
16
torque tube
connecting shaft (2)
lifting arm in raised position (2)
locking pin installed, locking MWL in storage position
Milltronics MWL Weight Lifter
Operating Instructions, 11/2011, 7ML19985CR03-03