Treatment Sequence - EMS AIRFLOW Prophylaxis Master Instructions For Use Manual

3.2. Treatment sequence

Consult the Treatment Recommendations (document series FB-648) before starting any
treatment to the patient.
AIRFLOW
®
1 Position the powder chamber.
2 Pressurize the chamber.
3 Set the AIRFLOW
®
4 Set the water flow.
5 Take the AIRFLOW
6 Press the pedal to start treatment.
7 [Step hard on the center of the BT pedal for
BOOST.]
8 Release the pedal to stop treatment.
9 Put the handpiece back into its holder.
PIEZON
®
1 Set the PIEZON
®
2 Set the water flow.
3 Connect the PIEZON
4 Take the PIEZON
5 Press the pedal to start treatment.
6 [Step hard on the center of the BT pedal for
BOOST.]
7 Release the pedal to stop treatment.
8 Put the handpiece back into its holder.
Treatment does not stop immediately. Beware there is a small delay between the release of the
pedal and the effective stop of the treatment (approximately 0.2 second).
Risk of patient injury. If you are not trained on a specific treatment, do not execute it.
Always get trained before executing new treatments.
ENGLISH
power.
® Handpiece.
power.
bottle (if required).
®
® Handpiece.
FB-618/AU – rev.E – ed.2019/08
7
6
8
4
1
2
6
5
7
2
1
5
3
4
3
21/48