EMS AIRFLOW Prophylaxis Master Instructions For Use Manual page 10

Connect air and water hoses
Turn the device over and place it upside down.
Connect the air hose EH-142 to the cabinet/dental unit.
1
Push the hose connector into the air jack firmly (it may be hard).
Connect the water hose EG-110 to the cabinet/dental unit.
To prevent retro contamination, connect the cable to an EN-1717 or
2
DVGW compliant fluids source.
DO NOT install the PIEZON
the air and water lines.
Install accessories
Continue to keep the device upside down and disconnected from the power grid!
6
4
ENGLISH
or NIGHT CLEANER bottle before connecting
®
6 5
4 3
3 1 2
FB-618/AU – rev.E – ed.2019/08
Pressure: 4.5 to 7 bar
Dry air. Max. humidity: 1.032 g/m
Filtration: max. 1 μm
Drinking water
Pressure: 2 to 5 bar
Salinity: max. 0.2%
Temperature: 10°C to 30°C
EH-142
1
Air hose – filter pre-installed
PUSH VERY HARD
EG-110
2
5
Water hose – filter pre-installed
Power cord into socket
3
(Fuse holder in the socket)
EK-410
4
Wired pedal
ONLY IF APLICABLE
EM-145
AIRFLOW
5
lock actuator
PUSH HARD
EM-146
PIEZON
6
actuator
PUSH HARD
3
handpiece cord +
®
handpiece cord + lock
®
10/48