EMS AIRFLOW Prophylaxis Master Instructions For Use Manual page 20

Water temperature and acoustic feedback settings
AIRFLOW and PIEZON
®
To adjust the water temperature or the acoustic feedback, follow the procedure below:
1. Turn the device ON.
2. Securely place both handpieces (AIRFLOW
3. Press  +  simultaneously to access the menu. (See image below – place fingers in the
groove below the numbers)
4. Colors will appear on the numbers:
•
0 to 4 for setting water temperature (5 is not used)
• 6 to 10 for setting acoustic feedback (5 is not used)
Water temperature
0 1
No
25°
Heating
5. Change the settings according to your wish.
6. Press the ON/OFF button to save the setting and exit.
Note:
•
Changes are applied to both AIRFLOW
•
After a few seconds of keyboard inactivity, the device automatically exits the mode.
The target temperature is determined into the device's body.
4
On AIRFLOW ® side, water temperature decreases along the cord. Air spray also decreases the temperature.
Final temperature of AIRFLOW
On PIEZON side, PIEZON
®
the cord. Please adjust the temperature setting for maximizing patient comfort.
ENGLISH
liquids' temperature is 40°C by default.
®
4
2 3
30° 35° 40°
spray is lukewarm, lower than 40°C.
®
Handpiece warms up the waterline which compensates natural cooling along
®
FB-618/AU – rev.E – ed.2019/08
and PIEZON ) back into their holders.
® ®
Acoustic feedback
4 6 7
No Low
sound volume
and PIEZON liquid temperatures.
® ®
8 9
Medium High Maximum
volume volume volume
20/48
10