Motor Nameplate Data - Danfoss Cascade Operating Instructions Manual

Portuguese (PORTUGUESA)
Finnish (SUOMI)
Function:
This choice defines the language to be
used on the display.
Description of choice:
Select the display language.
NB!:
It is important that the values set in parameters
102-106, Motor nameplate data, correspond
to the nameplate data of the motor.

Motor nameplate data

Quick Menu 002 Par. 102 Motor power
(MOTOR POWER)
Value:
0.1/3 HP (0.25 KW)
0.5 HP (0.37 KW)
0.75 HP (0.55 KW)
1.0 HP (0.75 KW)
1.5 HP (1.10 KW)
2 HP (1.50 KW)
3 HP (2.20 KW)
4 HP (3.00 KW)
5 HP (4.00 KW)
7.5 HP (5.50 KW)
10 HP (7.50 KW)
15 HP (11.00 KW)
20 HP (15.00 KW)
25 HP (18.50 KW)
30 HP (22.00 KW)
40 HP (30.00 KW)
50 HP (37.00 KW)
60 HP (45.00 KW)
75 HP (55.00 KW)
100 HP (75.00 KW)
125 HP (90.00 KW)
150 HP (110.00 KW)
200 HP (132.00 KW)
250 HP (160.00 KW)
300 HP (200.00 KW)
350 HP (250.00 KW)
400 HP (300.00 KW)
450 HP (315.00 KW)
500 HP (355.00 KW)
600 HP (400.00 KW)
Depends on the unit
Function:
This sets the power value that corresponds to the
nameplate power of the motor. The default setting
30
Cascade Controller Option
is the full rating of the drive. The drive can operate
motors undersized by up to four ratings below the
full rating of the drive or oversized by one rating.
Description of choice:
Select a value that equals the nameplate
data on the motor. tage
Quick Menu 003 Par. 103 Motor voltage
(MOTOR VOLTAGE)
Value:
200 V
208 V
220 V
230 V
240 V
380 V
400 V
[000.25]
415 V
[000.37]
440 V
[000.55]
460 V
[000.75]
480 V
[001.10]
500 V
[001.50]
Depends on motor
[002.20]
[003.00] Function:
[004.00]
This is where the rated motor voltage is selected.
[005.50]
Description of choice:
[007.50]
Select a value that equals the nameplate data on
[011.00]
the motor, regardless of the AC input voltage of
[015.00]
the VLT adjustable frequency drive.
[018.50]
[022.00]
[030.00]
[037.00]
Quick Menu 004 Par. 104 Motor frequency
[045.00]
(MOTOR FREQUENCY)
[055.00]
Value:
[075.00]
50 Hz
[090.00]
60 Hz
[110.00]
[132.00]
Function:
[160.00]
This is where the rated motor frequency is selected.
[200.00]
Description of choice:
[250.00]
Select a value that equals the nameplate
[300.00]
data on the motor.
[315.00]
[355.00]
[400.00]
MG.60.I3.02 - VLT is a registered Danfoss trademark
[200]
[208]
[220]
[230]
[240]
[380]
[400]
[400]
[440]
[460]
[480]
[500]
60