Danfoss Cascade Operating Instructions Manual page 37

(DOWNLOAD ALL PARAM.)
Download power-independent parameters
(DOWNLOAD SIZE INDEP.)
Function:
This parameter is used to copy all parameter setups to
or from the Local Control Panel (LCP) keypad. It can
be used to store a backup copy of all parameters in the
LCP or to copy all setups from one drive to another.
Description of choice:
Select Upload all parameters to copy all parameter
values from the drive to the LCP.
Select Download all parameters to copy all
parameter values from the LCP to the drive on
which the keypad is mounted.
Select Download power-independent parameters
if only the power-independent parameters are
to be downloaded. This allows the parameters
from one drive to be easily copied to another
drive of a different size. Settings in parameters
102, 103, 104, 105, 106, 215, 221, and 222 are
not downloaded using this function.
NB!:
Copying is only possible when drive is stopped.
MG.60.I3.02 - VLT is a registered Danfoss trademark
Cascade Controller Option
[2]
[3]
37