Removing And Attaching The Presser Foot Holder - Baby Lock Vesta BLMVE Instruction And Reference Manual

Removing and attaching the presser foot
holder
Remove the presser foot holder when cleaning the machine or
when installing a presser foot that does not use the presser
foot holder, such as the walking foot and quilting foot.
■ Removing the presser foot holder
Press .
a
• When the message [OK to automatically lower the
presser foot?] appears on the LCD screen, press
to continue.
 The screen changes, and all keys and operation
buttons are locked (except
b Remove the presser foot.
• For details, refer to "Replacing the presser foot" on
page 32.
c Use the screwdriver to loosen the presser foot holder
screw.
Turn the screw toward the back of the machine
(counterclockwise).
• The presser foot holder screw can also be loosened
or tightened with the disc-shaped screwdriver.
Press to unlock all keys and buttons.
d
■ Attaching the presser foot holder
a Press .
• When the message [OK to automatically lower the
presser foot?] appears on the LCD screen, press
to continue.
 The screen changes, and all keys and operation
buttons are locked (except
b
c
).
d
e
).
Replacing the Presser Foot
Raise the presser foot lever.
Align the notch in the presser foot holder with the
screw.
1 Screw
2 Notch in presser foot
a
Hold the presser foot holder in place with your right
hand, and then tighten the screw using the screwdriver
in your left hand.
Turn the screw toward you (clockwise).
CAUTION
• Be sure to securely tighten the presser foot
holder screw, otherwise the presser foot
holder may fall off and the needle may strike
it, causing the needle to bend or break.
Press to unlock all keys and buttons.
holder
33
1