Side Window Installation Diagram - Piper PA-44-180 SEMINOLE Maintenance Manual

ISOCRYL TAPE
1. Remove the molding and retainer from around the window by removing attaching screws and rivets.
2. Carefully remove the damaged window from the frame.
3. Remove old tape and sealer from the window frame and molding.
4. Cut or grind the new window to the same dimensions as the one removed.
5. Apply vinyl foam tape series 530 or equivalent (refer to Chapter 91, Consumable Materials list for suppliers)
on both sides of the window around the outer edges.
6. Insert the window in the frame and install the retainer molding.
7. Secure the retainer molding with attaching screws and rivets, tighten until the foam tape is 25% compressed
by the retainers.
8. Apply PR307 sealant or equivalent completely around the outer surface of the window, remove any excess
exposed sealer or tape.
PIPER AIRCRAFT
PA - 4 4 - 1 8 0 / 1 8 0 T
AIRPLANE MAINTENANCE MANUAL
Figure 56-2. Side Window Installation
— END —
3C3
5 6 - 3 1 - 0 1
Page 56-04
Revised: May 15, 1989