Advertisement
MAINTENANCE
7. Re-assemble the other parts in the reverse order
of removal.
Caution
While assembling the caliper assembly ensure that
the slot provided in the caliper is properly located to
the lug provided in the swing arm assembly.
Always make sure that whenever the wheel is
removed, axle nut is properly re-tightened to the
specified torque and chain play is re checked and
adjusted if required.
Note
During removal of rear wheel axle hold the drum
sprocket assembly with the hand as it may fall.
Carefully hang the drum sprocket along with chain in
the swing arm itself.
Warning
Keep the toner ring upwards whenever the wheel
is removed in order to avoid damages to the toner
ring. Damaged toner ring affects ABS function.
66
STORAGE PROCEDURES
For storage of your motorcycle for longer periods of
over a month and above, we recommend to carry out
the following steps:
1. Clean the vehicle thoroughly. Park the vehicle on
centre stand.
2. Warm up the engine and drain engine cum
transmission oil. Store the oil, if new, in a dust free
container.
3. Remove the spark plug and feed in several drop of
engine cum transmission oil through spark plug
hole. Crank the engine few times and reinstall the
spark plug.
4. Remove the battery, store it away from direct
sunlight and freezing temperatures.
Caution
Do not park the vehicle on a slope or soft ground or
else it may fall.
During storage, the battery must be recharged on a
constant current battery charger at recommended
amperage atleast once in a month.
Hide quick links:
Advertisement
