TVS Apache RTR 200 Fi4V with ABS Owner's Manual page 33

KNOW YOUR TVS APACHE RTR 200 Fi4V with ABS
On pressing the 'Set' button, 'CLOCK MODE'
l
scrolls in running display and the hour digit of the
clock blinks.
Now, press the 'Mode' button to increase the
l
hours while hour digits are blinking.
On pressing the 'Set' button again the hours of the
l
clock is set and the minute digit blinks.
Now, press the 'Mode' button to increase the
l
minutes while minute digits are blinking.
Else, on pressing the 'Set' button again the
l
minutes of the clock is set and the hour format
'AM' or 'PM' blinks.
Press the 'Mode' button to change the hour
l
format 'AM' or 'PM'.
Press the 'Set' button once again to set hour
l
format and to come out from clock setting.
Setting the Shift RPM
Press and hold the 'Mode' button till 'MPH' icon
l
blinks in display.
Release and press the 'Mode' button twice so that
l
the 'RPM' icon blinks.
Press the 'Set' button to reach shift RPM setting
l
mode the 'SHIFT RPM' icon scrolls in running
display for one cycle. Previous RPM setting value
is displayed in the bar display and LED will glow.
Now, press the 'Mode' button to increase the
l
RPM (multiples of 1000) in cyclic fashion. Once
the user starts updating, the LED stops glowing.
Pressing the 'Set' button exits the setting. Once
l
the shift RPM is set, the LED again glows till this
mode is exit.
Note
By default the shift rpm is set to 7000 RPM. You can
set it to your convenience as per your riding habit.
29