TVS Apache RTR 200 Fi4V with ABS Owner's Manual page 29

KNOW YOUR TVS APACHE RTR 200 Fi4V with ABS
11. Shift RPM indicator
Gear shift RPM indicator alerts the user to shift the
gears when engine reaches the specified RPM. Users
can set the RPM indication levels as per their riding
convenience in multiples of 1000 and from 1000 to
12000 RPM. When the engine reaches the set RPM,
red indicator in the digital speedometer glows and
indicates the user to shift to next higher gear.
Note
Shift RPM indicator does not work when the
vehicle is in neutral or when the fifth gear is engaged.
12. Tachometer
Tachometer indicates the engine speed in multiples
of 1000 RPM (Revolutions Per Minute).
13. Trip F
This function shows the distance travelled after the
low fuel indication symbol (
gauge shows no segment bar, the display
automatically switches to the 'TRIP F' indicator after
1km or 0.6 miles as per preferred settings and 'TRIP F'
meter starts counting from 1 km in km/h mode and
0.6 miles in mph mode.
If the fuel level remains in minimum safe level, the
reading is saved even after the ignition key is turned
'OFF'.
The count stops and clears automatically after a
certain distance covered when the fuel level rises
above minimum safe level. 'TRIP F' meter cannot be
activated or deactivated manually.
The speedometer will be in TripF mode for a distance
of 1km even after filling the petrol to 1 bar level.
At every ignition ON, 'TRIP F' meter will get enabled
automatically until fuel level is reached above
minimum safe level (2.5 L / 1 bar indication).
) starts blinking and fuel
25