Advertisement
ANTI-LOCK BRAKE SYSTEM
Warning
Do not ride the vehicle in conditions like wheelie,
stoppie, on-stand engine revving in gear for chain
lubrication and during water wash etc... for more than
three minutes as it will result in ABS error and ABS
warning lamp glowing continuously. In such cases,
just switch 'OFF' and switch 'ON' the ignition key
once. ABS warning lamp may glow continuously if any
ABS error had occurred before.
This error gets cleared automatically and ABS warning
lamp goes 'OFF' after riding the vehicle above 10 kph
speed. If ABS warning lamp is still 'ON', then contact
the nearest TVS Motor Company Authorised
Distributor or Dealer / Authorised Service Center.
Note
Incase of ABS failure, the braking system will work
like a non ABS braking system and provides normal
stopping distance.
Note
This motorcycle is equipped with ABS and tubeless
tyres. For repair or replacement please contact
nearest TVS Motor Company Authorised Distributor
or Dealer / Authorised Service Center.
As a general riding practice it is advisable to apply
more front brake and less of rear brake.
Never open HECU on your own, it is a very sensitive
part of ABS and needs to be handled only by the
trained personnel. Contact your nearest TVS Motor
Company Authorised Distributor or Dealer /
Authorised Service Center.
07
Hide quick links:
Advertisement
