Advertisement
MAINTENANCE
FUSE REPLACEMENT
Non-working of electrical systems may be due to
safety fuse failure. Short circuit or overload in the
electrical system are the main causes for fuse failure.
Follow the procedure given below for inspecting and
replacing the fuse.
1. Turn 'OFF' the Ignition.
2. The fuse case is fitted under the rider's seat
contains 4 fuses.
10A fuse - EFI loads
r
15A fuse - Other electrical systems
r
20A fuse - Battery
r
25A fuse - ABS
r
54
Good Fuse
Remove the seats and utility box (refer page no.
28) to access the fuse case.
3. Remove the fuse case.
4. Open the fuse case and pull out the blown fuse.
5. Replace the blown fuse with a new (extra fuse is
provided inside the fuse case itself).
6. Close and refit the fuse case back to its position.
7. Turn 'ON' the ignition lock and check for proper
functioning of the electrical systems. lncase the
fuse fails again, consult the nearest TVS Motor
Company Authorised Distributor or Dealer /
Authorised Service Center.
Blown Fuse
Hide quick links:
Advertisement
