Advertisement
KNOW YOUR TVS APACHE RTR 200 Fi4V with ABS
If ignition is turned OFF when the meter is in ODO or
TRIP meters, then the respective meters will be
displayed in the next ignition ON. If any other modes
other than these were set during ignition OFF, then
ODO meter will be displayed in the next ignition ON.
1. In ODO mode, press the mode button twice or
thrice to change display to '
To reset any of the trip meter while ensuring
l
the display is in 'TRIP 1' or 'TRIP 2', press and
hold the set button for a few seconds
2. Press the 'Mode' button till the '
display appears to set the 'LAP ' timer mode.
The Lap timing achieved by any user will not
l
be stored and will be deleted once the mode is
changed or ignition is turned 'OFF'.
3. Press the 'Mode' button till the '
appears to set the 'HIGH SPEED' indicator mode.
To reset the high speed recorded, keep the
l
display in 'HIGH SPEED' mode and press the
'Set' button for a few seconds.
Note
Mode and set buttons will not work when the vehicle
speed exceeds above 10 km/h or 6 mph in the
respective modes.
28
' or '
' mode.
' timer
' display
4. Press the 'Mode' button till the display changes to
'
BEST RECORD
' to set the 'SHORTEST TIME' indicator.
LAST RECORD
To reset the 'LAST RECORD' of the shortest
l
time, press and hold the 'Set' button for few a
seconds. Please remember only current
record will be reset and best time display will
remain same.
5.
Press the 'Mode' button once to change the
display to ODO mode again.
KMPH and MPH setting
Ensure the display is in 'ODO' mode.
l
Press and hold the 'Mode' button till 'MPH' blinks
l
in display. Press 'Set' button to select the 'MPH'
mode, the 'MPH mode' icon scrolls in running
display for one full cycle.
To change the display to 'KMPH' mode again,
l
press and hold the 'Mode' button till 'KMPH'
blinks in display. Press 'Set' button to select the
'KMPH' mode, the 'KMPH mode' icon scrolls in
running display for one full cycle.
Digital clock setting
Press and hold the 'Mode' button till 'MPH' icon
l
blinks in display.
Release and press the 'Mode' button once again
l
so that the 'Clock' icon blinks.
Hide quick links:
Advertisement
