Advertisement
KNOW YOUR TVS APACHE RTR 200 Fi4V with ABS
HANDLE BAR LEFT SIDE
1. Horn switch
Press the switch (
) to blow horn. It is used to
attract the attention of other road users in case of
danger.
2. Turn signal lamp switch
When the turn signal switch is moved to left '
or right '
', the corresponding turn signal lamps
flashes. To stop flashing, push the switch in.
3. Clutch lever
Press the lever towards grip to disengage the drive. It
is used to disengage the clutch while shifting the
gears.
3
4
5
2
1
4. Pass-by switch
Press the switch to flash the head lamp. It is used to
give signal to the vehicles coming from the opposite
direction while overtaking other vehicles during day.
If the pass by switch is pressed when the engine is in
OFF condition, the head lamp HIGH beam alone will
with 50% of intensity.
glow
'
Once the engine is started, the head lamp glows
automatically and the head lamp beam toggles
between HIGH beam to LOW beam or vice versa on
pressing the switch.
Pass by system will not work if the engine cut off
switch is turned 'OFF'.
5. Head lamp high / low beam switch
The head lamp glows automatically once the engine is
started. Only the head lamp beam (high/low) can be
controlled with the beam control switch.
Press the top end of switch for HIGH beam '
bottom end for LOW beam '
Warning
Failure to switch the turn signal lamp ON or OFF at the
right time may lead to an accident.
' and
'.
31
Hide quick links:
Advertisement
