Polycom G7500 Reference Manual page 96

1 (default)
0
video.camera.groupViewSize
Specifies the framing size used by the EagleEye Director II or EagleEye Producer camera.
Medium (default) - Average-sized frame.
Wide - Most expansive frame.
Tight - Close-up frame.
video.camera.name
Specifies a name for the camera.
String (0-32)
video.camera.orientation
Specifies whether the video display is oriented normally or inverted (upside down).
Normal (default)
Inverted
video.camera.powerFrequency
Specifies the power-line frequency for your system. In most cases, this should be the same as
your display frequency.
Your system typically defaults to the correct power-line frequency based on the video standard
used in the country where it's located. This parameter helps you adapt the system to areas
where the frequency doesn't match the video standard. You might also need to change this
configuration to avoid flicker from fluorescent lights in the room.
50
60 (default)
video.camera.preset.snapshot.enable
Enables or disables the use of snapshot icons that represent camera presets.
To see a preset icon, you must enable this setting before configuring the preset.
1 (default)
0
video.camera.roomViewPIP
When enabled, a picture-in-picture window displays showing a wide angle of the room in
addition to the main window showing the primary speaker(s).
This parameter is supported when using a camera with tracking features, such as the EagleEye
Director II.
True (default)
False
video.camera.saturation
Specifies the intensity of the video color.
Integer (0-14)
6 (default)
video.camera.sleepMode
Polycom, Inc.
Video Parameters
94