Serial Port Parameters - Polycom G7500 Reference Manual

Serial Port Parameters

Topics:
▪ Serial Port Parameters
This section describes available configuration parameters for your system's serial port. Included are
permitted values and, if applicable, guidance for configuring related parameters.
Serial Port Parameters
Use the following parameters to configure serial port settings on your G7500 system.
device.serial.mode
Specifies the mode used for the RS-232 serial port.
Control (default) - Receives control signals from a touch-panel control. Allows any device
connected to the RS-232 port to control the system using API commands.
Off - Disables the serial port.
device.serial.baud
Set this to the same value configured on the serial device.
9600 (default)
19200
38400
57600
115200
device.serial.flowControl
Specifies if you want to use hardware flow control between the connected device and your
system.
none (default)
hardware
device.serial.parity
Set this to the same value configured on the serial device.
none (default)
even
odd
device.serial.stopBits
Set this to the same value configured on the serial device.
1 (default)
2
Polycom, Inc. 81