Polycom G7500 Reference Manual page 73

If set, this password must be entered to access the system through the web interface or
command-line API (SSH or telnet).
To successfully provision this parameter, you must set sec.auth.admin.useRoomPassword="0".
String
sec.auth.admin.room.password
If set, this password (also referred to as the Room Password) must be entered to change
administrator settings in the local interface.
String
sec.auth.admin.useRoomPassword
When set to "1", the password configured for sec.auth.admin.room.password is also used for
accessing the system remotely.
1 (default)
0
sec.auth.admin.room.password.canContainIdOrReverse
Specifies whether the associated ID or its reverse can be part of a password. If this setting is
enabled and the ID is "admin", passwords "admin" and "nimda" are allowed.
1 (default)
0
sec.auth.admin.room.password.expirationWarning
Specifies how many days in advance a warning displays indicating that the password will soon
expire (if a maximum password age is set).
Off (default)
1
2
3
4
5
6
7
sec.auth.admin.room.password.lowercaseCount
The minimum number of lowercase letters required for a valid password.
Off (default)
1
2
All
sec.auth.admin.room.password.maxAge
The maximum number of days before the password must change.
Off (default)
30
Polycom, Inc.
Security Parameters
71