Polycom G7500 Reference Manual page 59

Enable if you want the system to automatically determine the optimal call rate.
1 (default)
0
qos.intServ.audio
Specifies the IP Precedence priority level for audio RTP and associated RTCP traffic.
Integer (0-7)
5 (default)
qos.intServ.fecc
Specifies the IP Precedence priority level for control traffic on the following channels:
H.323: H.225.0 Call Signaling, H.225.0 RAS, H.245, and FECC.
SIP: SIP Signaling, FECC, and Binary Floor Control Protocol (BFCP).
Integer (0-7)
3 (default)
Note: FECC is enabled by video.camera.farControlNearCamera.
qos.intServ.oam
Specifies the IP Precedence value for traffic unrelated to video, audio, or FECC.
Integer (0-7)
0 (default)
qos.intServ.video
Specifies the IP Precedence priority level for video RTP and associated RTCP traffic.
Integer (0-7)
4 (default)
qos.LPR.enable
If enabled, the system uses the Lost Packet Recovery (LPR) protocol to help compensate for
packet loss if it occurs.
1 (default)
0
qos.maxRxBandwidth
Specifies the maximum receive call rate between 64 kbps and the system's maximum line rate.
This can be useful when the system is connected to the network using an access method with
different transmit and receive bandwidth.
6144 (default)
64
128
192
256
320
Polycom, Inc.
Quality of Service Parameters
57