Polycom G7500 Reference Manual page 68

15
20
30
45
60
120
240
480
sec.web.port
Specifies the port to use when accessing the system web interface over HTTP. If you change
the default, port 80, specify port 1025 or higher and make sure it is not already in use. (This
parameter is overridden if security.remoteaccess.web.httpsonly="1".)
Port number (length: at least 1)
80 (default)
sec.usb.disableAll
Set to "1" to prevent use of the system's USB 3.0 ports.
(The USB-C port, which only provides power, can't be turned off.)
0 (default)
1
sec.TLS.cert.sslVerificationDepth
Specifies how many links a certificate chain can have. The term peer certificate refers to any
certificate sent by the far-end host when a network connection is being established between the
two systems.
0
1
2 (default)
3
4
5
6
7
8
9
10
11
12
sec.TLS.cert.validatePeer.enable
Determines whether your system requires a remote server to present a valid certificate when
connecting to it for services, such as provisioning.
Polycom, Inc.
Security Parameters
66