Logging Parameters - Polycom G7500 Reference Manual

Logging Parameters

Topics:
▪ Logging Parameters
This section describes available logging configuration parameters. Included are permitted values and, if
applicable, guidance for configuring related parameters.
Logging Parameters
Use the following parameters to configure logging settings for your G7500 system.
device.syslog.autoTransfer.customFolderName
Lets you specify a folder name for manual log transfers.
Set if you configured device.syslog.autoTransfer.folderNameOption="Custom".
String (0-64)
Log_archive (default)
device.syslog.autoTransfer.folderNameOption
Specifies the folder name for log transfers.
SystemNameAndTimestamp (default) - Folder name is the system name and the timestamp of
the log transfer. For example, if the system name is Marketing, the folder name might be
marketing_<date_and_time>.
Timestamp - Folder name is the timestamp of the log transfer (e.g., <yyyyMMddhhmmssSSS>).
Custom - Lets you specify a folder name for manual log transfers. Set
device.syslog.autoTransfer.customFolderName.
device.syslog.autoTransfer.frequency
Specifies when logs are transferred.
Manual (default) - The transfer starts when you select the Start Log Transfer button, which is
visible only on the local interface. If the log fills before being transferred, new events overwrite
the oldest events.
AutoAtThreshold - The transfer starts automatically when the limit set for
device.syslog.autoTransfer.threshold is reached.
device.syslog.autoTransfer.threshold
Reaching the log storage threshold percentage you configure here creates a log entry and
automatically transfers logs to an external storage device if
device.syslog.autoTransfer.frequency="AutoAtThreshold".
Off (default)
90
80
70
60
Polycom, Inc. 35