Polycom G7500 Reference Manual page 85

Polycom does not support SNMP write operations for configuring or provisioning systems. The
community string is for read operations and outgoing SNMP traps.
String (0-256)
public (default)
Note: For security reasons, do not use the default community string.
snmp.contactName
Specifies the name of the person responsible for remotely managing the system.
String (0-64)
IT Administrator (default)
snmp.locationName
Specifies the system location.
String (0-256)
snmp.systemDesc
Provides details about what kind of system it is.
String (0-256)
Videoconferencing Device (default)
snmp.auth.userId
Specifies the User Security Model (USM) account name for SNMPv3 message transactions.
You must set snmp.version3.enable="1" to configure this parameter.
String (0-64)
snmp.auth.algorithm
Specifies the type of SNMPv3 authentication algorithm used.
You must set snmp.version3.enable="1" to configure this parameter.
SHA (default)
MD5
snmp.auth.password
Specifies the SNMPv3 authentication password.
You must set snmp.version3.enable="1" to configure this parameter.
String (0-48)
snmp.privacyAlgorithm
Specifies the cryptographic privacy algorithm for SNMPv3 packets.
You must set snmp.version3.enable="1" to configure this parameter.
CFB-AES128 (default)
CBC-DES
snmp.privacyPassword
Specifies the SNMPv3 privacy (encryption) password.
Polycom, Inc.
SNMP Parameters
83