Microphone Adapter Parameters - Polycom G7500 Reference Manual

4 Severity Error (3)
5 Severity Critical (2)
6 Severity Emergency (0)
0-6 (default is 1)
log.render.stdout
Enables or disables the logs print to standard out (serial and shell terminal).
0-1 (default is 0)
mr.pair.tls.enabled
Enables or disables TLS between paired devices.
0-1 (default is 1)
device.net.mikoTimeout.set
Allows you to set the device.net.mikoTime parameter.
0-1 (default is 0)
device.net.mikoTimeout
Timeout value for table microphone DHCP in seconds.
30-60 (default is 30)
feature.usbdevice.enable
Enables or disables USB device access.
0-1 (default is 1)

Microphone Adapter Parameters

Use the following parameters to configure the Polycom Microphone IP Adapter to your system.
device.syslog.renderLevel
Controls the logging details level.
Debug (default)
Info
Warning
Error
Critical
call.encryption.requireAES
Controls when to use the audio encryption.
Off
When_Available (default)
Required_Video
Required_All
sec.TLS.disableVersion1
Enables or disables TLS1.0.
Polycom, Inc.
Peripheral Device Parameters
53