Polycom G7500 Reference Manual page 20

Specifies the protocol for authenticating with the LDAP server.
ntlm (default)
anonymous
basic
dir.ldap.baseDN
Specifies the top level of the LDAP directory where searches begin.
To avoid LDAP registration issues, make sure the base DN is at least one level deeper than
your domain. For example, set "ou=users,dc=example,dc=com" instead of
"dc=example,dc=com".
String (0-128)
${ldap_baseDN} - RealPresence Resource Manager accepts this value to automatically
configure the parameter.
dir.ldap.bindDN
Specifies the bind DN when using basic authentication (i.e., dir.ldap.authType="basic").
String (0-128)
dir.ldap.defaultGroupDN
Specifies the top-level group of the LDAP directory required to access its hierarchical structure.
String (0-128)
${ldap_defaultgroupDN} - RealPresence Resource Manager accepts this value to automatically
configure the parameter.
dir.ldap.server.address
Specifies the address of the LDAP directory server.
String (0-255)
${ldap_serveraddress} - RealPresence Resource Manager accepts this value to automatically
configure the parameter.
dir.ldap.server.port
Specifies the port for connecting with the LDAP server.
Integer
389(default)
dir.ldap.useSSL
Encrypts data to and from the LDAP server when enabled.
1 (default)
0
dir.serverType
Specifies the type of directory service you want to register with. (Your system's local directory is
always enabled.)
Off (default) - Use only the system's local directory.
LDAP - Register with an LDAP directory.
Polycom GDS - Register with the Polycom Global Directory Server (GDS).
Polycom, Inc.
Directory Parameters
18