Avaya J129 Installing And Administering page 96

List of configuration parameters
Parameter name
DSCPAUD
DSCPSIG
DSTOFFSET
DSTSTART
DSTSTOP
DTMF_PAYLOAD_TYPE
E
EASG_SITE_AUTH_FACTOR
EASG_SITE_CERTS
ELD_SYSNUM
September 2017
Default value Description
46 Specifies the layer 3 Differentiated Services
(DiffServ) Code Point for audio frames generated
by the phone.
Valid values are from 0 to 63.
This parameter can also be set through the LLDP,
which overwrites any value set in this file.
34 Specifies the layer 3 Differentiated Services
(DiffServ) Code Point for signaling frames
generated by the phone.
Valid values are 0 through 63.
This parameter can also be set through LLDP,
which overwrites any value set in this file.
1 Specifies the time offset in hours of daylight
savings time from local standard time.
Valid values are 0, 1, or 2. The default value is 1.
2SunMar2L Specifies when to apply the offset for daylight
savings time.
The default value is 2SunMar2L (the second
Sunday in March at 2AM local time).
1SunNov2L Specifies when to stop applying the offset for
daylight savings time.
The default value is 1SunNov2L (the first Sunday
in November at 2AM local time).
120 Specifies the RTP payload type to be used for RFC
2833 signaling.
Valid values are 96 through 127.
Null Specifies Site Authentication Factor code
associated with the EASG site certificate being
installed. Valid values are 10 to 20 character
alphanumeric string.
Null Specifies list of EASG site certificates which are
used by technicians when they don't have access
to the Avaya network to generate EASG responses
for SSH login. The URLs must be separated by
commas without any intervening spaces. Valid
values are 0 to 255 ASCII characters.
1 Controls whether Enhanced Local Dialing algorithm
will be applied for System Numbers-Busy
Indicators and Auto Dials.
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Table continues...
96