Avaya J129 Installing And Administering page 95

Parameter name
DISPLAY_SSL_VERSION
DNSSRVR
DOMAIN
DOT1X
DOT1XEAPS
DOT1XSTAT
September 2017
Default value Description
0 Specifies whether OpenSSL and OpenSSH
versions are displayed in the Administration
menu.
Value Operation:
• 0: OpenSSL and OpenSSH versions are not
• 1: OpenSSL and OpenSSH versions are
Domain Name Server for Access Profile 2
Null Specifies a character string that will be appended
to parameter values that are specified as DNS
names, before the name is resolved.
The value can contain 0 to 255 characters. The
default value is null.
Specifies the 802.1X pass-through operating
mode.
Pass-through is the forwarding of EAPOL frames
between the phone's ethernet line interface and its
secondary (PC) ethernet interface
Value Operation:
• 0: EAPOL multicast pass-through enabled
• 1: EAPOL multicast pass-through enabled with
• 2: EAPOL multicast pass-through disabled.
MD5 Specifies the authentication method to be used by
802.1X.
Valid values are MD5, and TLS.
0 Specifies the 802.1X supplicant operating mode.
Value Operation:
• 0: Supplicant disabled.
• 1: Supplicant enabled, but responds only to
• 2: Supplicant enabled; responds to received
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Note:
Set the parameter to 0 for IP Office
environment.
displayed.
displayed.
without proxy logoff.
proxy logoff.
received unicast EAPOL messages.
unicast and multicast EAPOL messages.
Table continues...
95