Avaya J129 Installing And Administering page 39

Parameter name
PHY2TAGS
L2QVLAN
PHY2VLAN
L2QAUD
September 2017
Default value
0
0
0
6
Installing and Administering Avaya J129 IP Phone
Comments on this document? infodev@avaya.com
Virtual LAN (VLAN) overview
Description
Value operation:
• 0: Disabled
• 1: Enabled
VLANSEPMODE is configured through the
Settings file.
Determines whether or not VLAN tags are
stripped on Ethernet frames going out of the
Computer (PC) port.
Value operation:
• 0: Strip tags. VLAN tags are stripped from
Ethernet frames leaving the computer (PC) port
of the phone.
• 1: Does not strip tags. VLAN tags are not
stripped from Ethernet frames leaving the
Computer (PC) port of the phone.
PHY2TAGS is configured through the Settings
file.
Specifies the voice VLAN ID to be used by IP
phones.
Valid values are 0 through 4094.
L2QVLAN is configured through:
• Local admin procedure
• A name equal to value pair in DHCPACK
message
• SET command in the Settings file
• DHCP option 43
• LLDP
Specifies the value of the 802.1Q VLAN ID that is
used to identify network traffic going into and
coming out of the internal CPU of the phone.
Valid values are 0 through 4094.
PHY2VLAN is configured through:
• SET command in the Settings file
• LLDP
Specifies the value of the VLAN priority portion of
the VLAN tag when the phone generates tagged
Ethernet frames from the internal CPU of the
Table continues...
39