Station Outgoing Lockout; Account Code Entry; Account Code Forced/Verified - NEC XEN IPK DIGITAL TELEPHONE Manual

Station Outgoing Lockout

Changing Lockout Code
Press Speaker
Dial Lockout Change access code_____
Dial current Lockout code
Dial new Lockout code
Press Speaker
Note 1: By default, Lockout code is set at 0000000000 (10 zeros).
Note 2: When Lockout code is set for the first time, station is automatically restricted.
Note 3: Lockout code may be a maximum of 10 digits. If the new Lockout code is
less than 10 digits, press the Speaker to re-enter.
Note 4: When set, Station Outgoing Lockout restricts all outgoing calls.
Set/Cancel Station Outgoing Lockout
Press Speaker
Dial Station Lockout
- Set code
- Cancel code
Dial Lockout code
Press Speaker

Account Code Entry

With an outside call in progress:
Press Feature
Dial 66
Dial Account Code
(16 digits maximum)
Press Feature
Note 1: The outside party will not hear digits being dialled.
Note 2: The Account Code Entry Code may be assigned to a Feature Access Key or
One Touch Key.
Account Code Forced
To place an outside call:
Lift handset
Dial Forced Account Code access code_____
Dial Forced Account Code_____(up to 13 digits)
Dial trunk access code i.e. 0 and outside number
Note: When calling from a station that is assigned the Account Code Forced /
Verified feature, outgoing call will only be processed after the dialled Account
Code is verified.
14
_____
_____
With an outside call on hold:
Dial Account Code Entry
Code_____
Dial Account Code
(16 digits maximum)
Retrieve held call