Daily Checks - Rotax 912 iS Sport Operator's Manual

3.1) Daily checks

Safety
Coolant level
Page 3-2
January 01 2019
To warrant reliability and efficiency of the engine, meet and
carefully observe all the operating and maintenance
instructions.
Risk of burnings and scalds! Hot engine parts!
Conduct checks on the cold engine only!
Non-compliance can result in serious injuries or death!
When performing checks which do not require ignition make sure
that the ECU is turned off and the aircraft is secured to prevent form
If established abnormalities (e.g. excessive resistance of the
engine, noise etc.) inspection in accordance with the relevant
Maintenance Manual is necessary. Do not release the engine in-
to service before rectification.
Operating media must be observed.
Inappropriate coolant quantity can lead to serious engine damage.
The specifications given in
when refilling coolant.
Step Procedure
1 Verify coolant level in the expansion tank, replenish as
required up to top. The max. coolant level must be flush
with the bottom of the filler neck.
2 Verify coolant level in the overflow bottle, replenish as
required. The coolant level must be between max. and
min. mark.
ENVIRONMENTAL NOTE
Do not harm the environment by spilling coolant. Dispose coolant in
an environmentally friendly manner.
BRP-Rotax
m WARNING
m WARNING
unwanted engine starts.
ATTENTION
ATTENTION
Chapter 2.2
Protect the environment!
must be adhered to
Effectivity: 912 i Series
Edition 2 / Rev. 0