Propeller
governor
External
alternator
2.2) Operating media-Coolant
Conventional
coolant
Application
Mixture
2.3) Operating media-Fuel
Effectivity: 912 i Series
Edition 2 / Rev. 0
Power consumption of the hydraulic propeller governor
Max.
600 W
Power consumption of the external alternator
Max.
600 W
Obey the latest edition of Service Instruction SI-912 i-001, for
the selection of the correct operating media.
Conventional coolant mixed with water has the advantage of a
higher specific thermal capacity than water-less coolant.
When correctly applied, there is sufficient protection against va-
por bubble formation, freezing or thickening of the coolant with-
in the operating limits.
Use the coolant specified in the manufacturers documentation.
Obey the operating media manufacturer's instructions!
Obey the latest edition of Service Instruction SI-912 i-001, for
the selection of the correct operating media.
Use only fuel suitable for the respective climatic zone.
NOTE
Risk of vapour formation when using winter fuel for summer
operation.
BRP-Rotax
ATTENTION
ATTENTION
ATTENTION
ATTENTION
Page 2-5
January 01 2019