Rotax 912 iS Sport Operator's Manual page 27

Acceleration
Static roll angle
Oil pressure
Oil temperature
Effectivity: 912 i Series
Edition 2 / Rev. 0
Limit of engine operation at zero gravity and in negative "g"
condition.
Parameter
Acceleration
The dry sump lubrication system warrants lubrication in every
flight situation.
Parameter
Static roll angle ß
Parameter
Oil pressure at en-
gine speed <3500
rpm
Oil pressure at en-
gine speed >3500
rpm
Parameter
Oil temperature at
ground idle, start pro-
cedure and warm up
Oil temperature at
normal operation
Operating the engine below (90 to 110 °C / 194 to 230 °F) may
lead to formation of condensation water in the lubrication sys-
tem. To evaporate possibly accumulated condensation water,
at least once a day 100 °C (212 °F) oil temperature must be
BRP-Rotax
Min.
–
Min.
Min.
0.8 bar / 11.6 psi
2.0 bar / 29 psi
Min.
-20 °C (-4 °F)
50 °C / 122 °F
ATTENTION
reached.
Max.
–0.5 g (max. 5
seconds)
Max.
40°
Max.
5 bar / 72.5 psi
(max. 7 bar al-
lowed only for a
short period at cold
start)
5 bar / 72.5 psi
(max. 7 bar al-
lowed only for a
short period at cold
start)
Max.
100 °C (212 °F)
130 °C (266 °F)
Page 2-3
January 01 2019