Daily Checks; Coolant Level - Rotax 912 Series Operator's Manual

3.1) Daily checks

Safety

Coolant level

Page 3-2
November 01/2016
To warrant reliability and efficiency of the engine, meet and
carefully observe all the operating and maintenance
instructions.
Risk of burnings and scalds! Hot engine parts!
Conduct checks on the cold engine only!
Non-compliance can result in serious injuries or death!
Ignition "OFF" Before moving the propeller switch off both ignition
circuit and secure the aircraft. Have the cockpit occupied by a com-
If established abnormalities (e.g. excessive resistance of the
engine, noise etc.) inspection in accordance with the relevant
Maintenance Manual is necessary. Do not release the engine in-
to service before rectification.
Operating media are to be observed!
The coolant specifications of the section
Step Procedure
1 Verify coolant level in the expansion tank, replenish as
required up to top. The max. coolant level must be flush
with the bottom of the filler neck.
2 Verify coolant level in the overflow bottle, replenish as
required. The coolant level must be between max. and
min. mark.
ENVIRONMENT NOTE
Protect the environmental!
Never spill any coolant. Dispose of the coolant in an environmentally
BRP-Rotax
m WARNING
m WARNING
petent person.
ATTENTION
ATTENTION
Chapter
sound way!
Effectivity: 912 Serie
2.3.
Edition 4 / Rev. 0