Pcs-R1 Remote Commander - Sony PCS-1/1P Operating Instructions Manual

a Lens
b Microphone
c POWER indicator (green)
Lights when the power switch on the
Communication Terminal is set to on
and goes out when it is set to off or the
Terminal is set to standby mode.
d Remote sensor
Point the Remote Commander to the
sensor when operating this System.
e Infrared sensor
Receives the infrared wireless signal
from the optional PCS-DS150
Document Stand. The received signal is
used as object input.
f TERMINAL connector
Connect to the CAMERA UNIT
connector on the Communication
Terminal.
g VISCA OUT connector
h Tripod hole
Use to attach the camera on a tripod.
198
Location and Function of Parts and Controls

PCS-R1 Remote Commander

MIC
ON/OFF
VOLUME
DISPLAY
CLEAR
PinP
BACK
SPACE
PUSH
ENTER
RETURN
CONNECT/
DISCONNECT
HELP
PCS-R1
You can set for a beep not to sound by
pressing the button on the Remote
Commander with the Audio Setup menu.
For the setting, see "Audio Setup Menu" on
page 48.
a MIC ON/OFF button
Cuts off the local sound to be sent to a
remote party. To restore the sound, press
the button again.
b VOLUME +/– button
Adjusts the volume of the sound
received from a remote party.
+: to increase the volume
–: to decrease the volume
ZOOM
VIDEOINPUT
SELECT
SYMBOL
FAR/NEAR
ALPHA/
NUM
MENU