Sony PCS-1/1P Operating Instructions Manual page 165

3
Select the line interface icon or a still image to be displayed in the Phone
Book.
The icon is shown as "
4
Set up the line interface of the remote parties.
When "
Enter the IP addresses of all the parties in the A to E text boxes.
When "
Enter the telephone numbers of all the parties in the A to E text boxes.
To register a normal phone, enter the telephone number with "T" at the
beginning. (e.g., T0312345678)
When "
Select the interface (IP or ISDN) used from the drop-down list on the right of
the A to E text boxes, then enter the IP addresses for the LAN connection and
the telephone numbers for the ISDN connection for all the parties to be
connected for a multipoint conference.
To register a normal phone, enter the telephone number with "T" at the
beginning. (e.g., T0312345678)
List Edit
Index MULTILIST2
A
B
C
D
E
For details on the setups, see step 5 in "Registering a New Remote Party"
on page 63.
5
Press the V or v button to select "Save", then press the PUSH ENTER
button.
The registration of the multipoint connection list is completed.
To specify a remote party registered in the Phone Book to the multipoint
connection list
1
Use the V, v, B or b button on the Remote Commander to select the name
you want to register in the multipoint connection list.
IP", "
IP" is selected
ISDN" is selected
IP&ISDN" is selected
IP
Line I/F
IP
IP&ISDN
IP
LAN Bandwidth
1024 Kbps
IP
Number of Lines
IP
6 B (384K)
Save
Preparing for a multipoint videoconference
ISDN" or " IP & ISDN".
IP
ISDN
Cancel
165