Sony PCS-1/1P Operating Instructions Manual page 44

the transmission rate of 64 Kbps. In this case,
set "Restrict" to "56K" before dialing.
LAN Bandwidth
Select the bandwidth to be used when
connected to a LAN.
You can select from among 64 Kbps, 128
Kbps, 256 Kbps, 384 Kbps, 512 Kbps, 768
Kbps, 1024 Kbps, 1920 Kbps and "Other".
When "Other" is selected, a bandwidth value
between 1 and 1920 Kbps can be entered.
ISDN MSN
Selects whether you are using the Multiple
Subscriber Number.
On: Selects when you use the Multiple
Subscriber Number.
Off: Selects when you do not use the
Multiple Subscriber Number.
Mic on Answer
Selects whether to transmit the sound on
your site when answering a call from the
remote party.
On: Transmits the sound when answering a
call.
Off: Disables transmission of the sound
when answering a call.
Page 2/2
Answer Setup
Page: 2/2
Video Mode
Video Frame
Audio Mode
Far End Camera Control
T.120 Data
H.239
Video Mode
Selects the compression format of the
pictures to be received from a remote party.
ALL: Receives pictures of any compression
format depending on the format used on
the remote site.
Interlaced SIF: Receives pictures based on
the interlaced SIF.
H.264: Receives pictures based on
Recommendation H.264.
MPEG4: Receives pictures based on the
MPEG4 format.
44
Registering Local Information
ISDN ALL
15fps
ALL
On
Off
On
Save Cancel
H.263+: Receives pictures based on
Recommendation H.263+.
H.261: Receives pictures based on
Recommendation H.261.
No Video: Receives audio only without
pictures.
Note
The Interlaced SIF format is not available if the
videoconferencing system of the connected
terminal has a different color system.
Video Frame
Selects the number of video frame to be
received.
15 fps: Receives CIF format pictures at a
maximum rate of 15 frames per second.
30 fps: Receives CIF format pictures at a
maximum rate of 30 frames per second.
Audio Mode
Selects the compression format of audio to
be received from a remote party.
ALL: Receives any audio compression
format depending on the format used on
the remote site.
MPEG4 Audio: Receives audio based on
the MPEG4 format.
G.722.1: Receives audio based on the
G.722.1 standard.
G.722: Receives audio based on the G.722
standard.
G.729: Receives audio based on the G.729
standard.
G.728: Receives audio based on the G.728
standard.
G.723.1: Receives audio based on the
G.723.1 standard.
G.711: Receives audio based on the G.711
standard.
Note
When the remote videoconferencing system
does not support the Audio Mode selected by
the local site, the mode automatically switches
to "G.711".
Far End Camera Control
When the conference starts with a call from
a remote party, selects whether to enable
control of each other's cameras from each
other's sites.