Sony PCS-1/1P Operating Instructions Manual page 96

Note
While in communication you can switch the video input of the remote system by
selecting "Far" in the Video Input Select menu.
Video Input Select
Main: Select the picture shot by the Camera.
Object: Select the picture from the optional PCS-DS150/DS150P Document
Stand.
AUX 1: Selects the picture from the equipment connected to the VIDEO IN
AUX 1 connector.
AUX 2: Select the picture from the equipment connected to the VIDEO IN
AUX 2 connector.
VCR: Select the picture input from the VCR connected to the system on the
remote site. This item does not appear unless the remote system is equipped
with the video input select function.
For information on the DSB input mode, see "To select a picture from a
computer connected to the Data Solution Box" on page 136.
3
Press the PUSH ENTER button on the Remote Commander.
To change the video input name displayed in the Video Input Select menu
If you label "Main", "Object", "AUX1" or "AUX2" under "Custom Input
Label" in Page 4 of the General Setup menu as a desired name, the displayed
input name in the Video Input Select menu will be changed to the label when
selecting the video input in step 2 above.
For example, you can label as Main, Document, Camera2, None.
For details on "Custom Input Label", see "Page 4/4" in the General Setup
menu on page 47.
96
Selecting the Input Picture and Sound
Near Far
Main Main
DSB Input
RGB A