Conference; System Configuration Via A Lan; And Isdn For Multipoint Conference - Sony PCS-1/1P Operating Instructions Manual

System Configuration via a LAN and ISDN for Multipoint

Conference

Installing the optional PCS-323M1 H.323 MCU software (for LAN) and PCS-
320M1 H.320 MCU software (for ISDN) enables conduct of a multipoint
conference via a LAN and ISDN mixed.
Two Communication Terminals in which MCU software is installed must be
connected via a LAN.
This allows you:
• To hold a multipoint videoconference among up to ten sites over LAN and
ISDN.
• To show still images stored in a "Memory Stick".
• To show the still images on the second TV monitor or projector.
• To pick up a large number of participants' voices using up to two external
microphones.
System configuration
ON LINE POWER LAN ALERT
1 PCS-P1/P1P Communication Terminal
2 PCS-C1/C1P Camera Unit
3 PCS-R1 Remote Commander
4 TV monitor (not supplied)
5 PCS-323M1 H.323 MCU software (not supplied)
6 PCS-320M1 H.320 MCU software (not supplied)
7 PCS-B384 or PCS-B768 ISDN Unit (not supplied)
*
LAN
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
1 2 3 4 5 6
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
ON LINE POWER LAN ALERT
1 2 3 4 5
ON LINE POWER LAN ALERT
* Be sure to make a connection
via LAN.
The illustration shows an
example using the PCS-B768
ISDN Unit.
System Configuration
6
ON LINE POWER LAN ALERT
19