Using The Communication Transducer (Cte) - Sony PCS-1/1P Operating Instructions Manual

Using the Communication Transducer
(CTE)
The CTE Communication Transducer is an integrated system equipped with
uni-directional microphones and omni-directional acoustic speaker. The unit is
enabled to pick up clear voice with minimum background noise from all
directions and to emit clear sound equally in all directions.
To connect the CTE-600 Communication Transducer
CTE-600
to an input/output
connector
TERMINAL
AUDIO OUT VIDEO IN AUDIO IN CAMERA UNIT
AUX1– –AUX2
(MIXED)
VIDEO OUT
AUX MAIN– MONITOR– SUB RGB OUT
1
To use the Communication Transducer (CTE)
• Set "CTE" in the Audio Setup menu to "AUX". (page 48)
• Set the SYSTEM SELECT switch at the bottom of the Communication
Tranceducer to "PCS".
For detailed information on the Communication Transducer, refer to the
Operating Instructions that come with the Communication Transducer.
120

Using the Communication Transducer (CTE)

to an input/output
connector
Connecting
cable
(supplied
with the
CTE-600)
Connecting cable
(not supplied)
VISCA OUT
to AUDIO
MIC
ISDN UNIT
(PLUG IN POWER) WHITE
IN
1 2 BOARD
100BASE-TX DC 19.5V
10BASE-T
DSB
IR OUT
2
to AUDIO OUT
Interface box
(supplied with the CTE-600)
to DC 6V
to LINE to LINE
OUT IN
Connecting cable
(not supplied)
AC adaptor (supplied
with the CTE-600 )
to a wall
outlet