Emerson Daniel 3410 Series Instructions For Use, Maintenance And Installation Manual page 86

Meter repairs
June 2019
23. If required, install a security seal wire (maximum wire diameter 0.09 inch; 2.3mm)
86
Figure 3-22: Base Enclosure security seals
A. Transmitter Electronics Enclosure
B. Security wire seals
C. Transmitter Electronics endcap security latch
D. Base Enclosure
on the Transducer Cable Connector to the Transducer Cable Nut by rotating the
Transducer Cable Nut clockwise; compressing the seal on the Transducer Cable
Connector (see Figure 3-23).
Figure 3-23: Transducer cable nut, chordset and security seal
A. Transducer cable nut
B. Transducer cable chordset
C. Security wire seal
Maintenance and Troubleshooting manual
Gas Ultrasonic Flow Meters
P/N 3-9000-769