Pgm/Pst Cross-Point Control Block - Sony MKS-2010 User Manual

Note
This button does not light and does not function when you
are using the rightmost buttons in the cross-point button
rows (the 12th or 20th buttons) as [SHIFT] button.

PGM/PST Cross-Point Control Block

Use the PGM/PST (program/preset) cross-point control
block to select the video signals to be used as the
background in program video (final output video).
PGM row
PGM/PST
BLACK
PGM
BLACK
PST
PST row
a Cross-point button rows
The buttons in the PGM (program) row select the
background video which is output before the start of a
transition. The buttons in the PST (preset) row select the
background video after the end of a transition.
The signals selectable with the cross-point buttons are the
same as the signals selectable with the corresponding
buttons in the M/E cross-point control block (see page 12).
The meaning of the colors in which buttons light and
button numbers are also the same. The [M/E] buttons at the
right edge of each cross-point button row are reentry
buttons. They allow you to import video created in the M/
E block and use it as background video in the PGM/PST
block.
b XPT (cross-point) HOLD button
By pressing this button to turn it on (it lights in amber), you
can recall a snapshot while retaining the current cross-
point button selection state. (The cross-point selection
information in the snapshot is ignored.)
14
Control Panel Configuration
For more information about operations to use the
rightmost buttons as [SHIFT] buttons, see "To use the
rightmost buttons in cross-point button rows as [SHIFT]
buttons (shift mode selection)" (page 158).
d Tally indicators
Currently not used.
This control block is found only on the 1.5 M/E and 1.5 M/
E wide panels.
1 Cross-point button rows
c SHIFT button
Press this button, turning it on, to use the cross-point
buttons as shift side buttons. Press it again, turning it off,
to use the cross-point buttons as non-shift side buttons
Note
This button does not light and does not function when you
are using the rightmost buttons in the cross-point button
rows (the 12th or 20th buttons) as [SHIFT] button.
For more information about operations to use the
rightmost buttons as [SHIFT] buttons, see "To use the
rightmost buttons in cross-point button rows as [SHIFT]
buttons (shift mode selection)" (page 158).
d Tally indicator
Currently not used.
2 XPT HOLD button
3 SHIFT button
XPT
SHIFT
HOLD
COLOR
M/E
BKGD
COLOR
M/E
BKGD
M/E buttons
4 Tally indicator