Selecting Video In The Pgm/Pst Cross-Point Control Block; Selecting Video In The Aux Bus Control Block - Sony MKS-2010 User Manual

Selecting Video in the PGM/PST Cross-Point Control Block

Selecting Video in the AUX Bus Control Block

When the button pressed to select background video is lit in red, the video
is displayed on the video monitor connected to the processor's program
(final video) output connector.
2
Press a button in the background B row to select the background video after
the transition.
The button lights in amber.
Select the background video before the transition by pressing a button in the
PGM row. Select the background video after the transition by pressing a button
in the PST row. Except for the [M/E] buttons at the right edge of the rows, the
buttons have the same names and select the same signals as the buttons in the
M/E cross-point control block.
To import video created in the M/E bank as background video into
the PGM/PST bank
Press the [M/E] button at the right edge of either row (PGM row or PST row).
In the AUX bus control block, you can use the AUX delegation buttons to assign
the cross-point button row to the desired bus, allowing you to select key signals
and signals to apply a variety of other functions.
The buses which can be selected by the AUX delegation buttons are as follows.
Button Selectable bus
AUX1 to 4 AUX1 bus to AUX4 bus
EDIT PVW Edit Pvw (edit preview) bus
UTIL Utility bus
KEY1 [SRC BUS] button off: Key1 bus
[SRC BUS] button on: Key1 Source bus
KEY2 [SRC BUS] button off: Key2 bus
[SRC BUS] button on: Key2 Source bus
DSK1 [SRC BUS] button off: DSK1 (downstream key 1) bus
[SRC BUS] button on: DSK1 Source (downstream key 1 source) bus
DSK2 [SRC BUS] button off: DSK2 (downstream key 2) bus
[SRC BUS] button on: DSK2 Source (downstream key 2 source) bus
CCR1, CCR1 (color correction1) bus, CCR2 bus
CCR2
FRAME [SRC BUS] button off: Frame Memory Video bus
MEM [SRC BUS] button on: Frame Memory Key bus
For more information about the buttons in the AUX bus control block, see "AUX
Bus Control Block" (page 15).
To select signals in the AUX bus control block, proceed as follows.
51
Selecting Video