Sony MKS-2010 User Manual page 41

Parameter group name
Knob 1 Knob 2
Parameter values can be set with either of the following methods.
• Rotate the knobs (1 to 5) corresponding to the parameters.
• Press the parameter button corresponding to a parameter, and enter a numeric
value in the numeric keypad window.
Parameter values are indicated by the length of the bars on the buttons and by
the numeric values under the bars.
In explaining specific operations, this manual gives examples of typical knob
settings, expressed as shown below.
Example 1: When a pattern key is selected
Knob
1 (Size)
2 (Soft)
3 (Density)
4 (Pattern)
Example 2: When a video process is selected
(The buttons of parameter group 1/2 are shown first, changing to parameter
group 2/2 when the [More] button in the position of knob 5 is pressed.
Knob
2 (Video Gain)
3 (Y Gain)
4 (Black Level)
Knob
2 (Video Gain)
3 (C Gain)
4 (Hue Delay)
Knob 3 Knob 4
Description
Size of pattern
Softness of edge width
Key density
Pattern number
Parameter group 1/2
Description
Overall gain of video signals
Gain of luminance signals
Black level
Parameter group 2/2
Description
Overall gain of video signals
Gain of chrominance signals
Amount of hue offset
Knob 5
Setting values
0.00 to 100.00
0.00 to 100.00
0.00 to 100.00
1 to 24
Setting values
–200.00 to +200.00
–200.00 to +200.00
–7.30 to +109.58
Setting values
–200.00 to +200.00
–200.00 to +200.00
–180.00 to +180.00
Basic Menu Operations
41