Accessing Menus
Accessing Menus From the Top Menu
Using Menus
The menus of this switcher enable you to make system settings and settings
related to effects.
To access menus, you can use any of the following three methods.
• Access from the top menu (see next section)
• Access by double clicking (see page 26)
• Access by single clicking (see page 28)
By pressing a top menu selection button in the menu control block (see page
23), you can directly access the menu page for that button. The menus which can
be accessed with top menu selection buttons are as follows.
Menus accessed with top menu selection buttons and their functions
Button
Menu
TOP/SHUTDOWN
Top/Shutdown
REG
Register
FILE
File
SET UP
Setup/Diagnosis
DIAG
Diagnosis
a) The most recently used menu is displayed.
b) Currently not supported.
To access a menu from the top menu, proceed as follows.
Chapter
Function
Display the top menu, and
exit the menu system.
a), b)
Make register settings.
a)
Make file settings.
Make settings related to
a)
setup, and to display of
error status and error
logs.
Display error status and
error logs.
Reference
page
Page 42
–
Page 137
Page 153
"Error
Messages"
in the
Appendix
(separate
document)
25
Accessing Menus