M/E Transition Control Block - Sony MKS-2010 User Manual

than key buses. For key buses, you can select any of the
following three options as the operating mode when a
snapshot is recalled with this button on.
• Cross-point hold (retain the current cross-point selection
state)
• Key disable (retain the current key settings)
• Key disable, plus retention of the current key on/off
states
See "Setting the key bus cross-point hold mode" (page
173) for more information about how to set the operating
mode.
e SHIFT button
Press this button, turning it on, to use the cross-point
buttons as shift side buttons. Press this button again,
turning it off, to use the cross-point buttons as non-shift
side buttons.

M/E Transition Control Block

Use this block to control transitions in M/E (mix/effect)
program video.
1 Transition execution section
FRAMES
M/E transition control
block on 1.5 M/E panel
and 1.5 M/E wide panel
16
Control Panel Configuration
2 Next transition selection buttons
3 OVER indicators
KEY
PRIOR
OVER OVER
BKGD KEY1 KEY2
NEXT TRANSITION
PST
MIX EFF COLOR
MIX
TRANSITION TYPE
AUTO
CUT
TRANS
4 Transition type
selection buttons
f Cross-point button row
These buttons select the signals to be output to the bus
selected with the AUX delegation buttons.
The signals which can be selected with each cross-point
button are the same as the signals selected by the
corresponding buttons in the M/E cross-point control
block (see page 12). Button numbers and the meaning of
the colors in which the buttons light are the same as those
of the buttons in the M/E cross-point control block.
However, the cross-point button row in the AUX bus
control block contains an [M/E] button and a [PGM]
button, which are not present in the M/E cross-point button
rows. The [M/E] button selects the M/E program video,
and the [PGM] button selects the program video (final
output video).
3 OVER indicators
OVER OVER
KEY KEY1 KEY2
PRIOR ON ON
BKGD KEY1 KEY2
NEXT TRANSITION
PST
COLOR
MIX EFF
MIX
TRANSITION TYPE
AUTO
CUT
TRANS
4 Transition type
selection buttons
2 Next transition
selection buttons
M/E transition control
block on 1 M/E panel
5 KEY1 ON and KEY2
ON buttons
FRAMES
1 Transition execution
section