Sony MKS-2010 User Manual page 150

3
Do one of the following to select the file to load.
• Press directly on the list in the status area.
• Use the arrow buttons to scroll the reverse video
cursor.
• Turn the knob.
Knob Description
2 (List No)
File number
Register number
a)Disk recorder
b)Extended VTR
4
Press [File Load].
The selected file is loaded, and its name appears at the
top of the status area.
Creating new files (disk recorders only)
1
From the top menu, select Misc >DDR/VTR >File
List.
The File List menu appears. The upper part of the
status area shows the device number of the currently
selected device, and the currently loaded file. The
lower part of the status area shows the currently loaded
file list.
Disk recorder set to Recorder
Note
File update dates are not displayed for disk recorders
using the Video Disk Communications Protocol.
2
Turn the knob to select the device on which to create
the new file.
Knob Description
1 (DEV) Device number
Note
You will not be able to create a file if you select a disk
recorder that is being used as a player.
3
Press [New File].
150
Controlling External Devices
Setting values
a) 1 and upwards
b) 0 and upwards
Setting values
1 to 6
The keyboard window appears.
4
Enter a file name and press [Enter].
The maximum file name length is as follows.
Disk recorder (Sony Disk 9-pin Protocol): 16
characters
Disk recorder (Video Disk Communications
Protocol): 8 characters
The new file name appears at the top of the status area.
When the loaded file is not a target for recording
Press [File Unload].
The current file name at the top of the status area is
cleared.