Sony MKS-2010 User Manual page 172

Utility command list
The status area displays the following abbreviated names
of utility commands.
Command name
Editor Enbl
SWR GPI Enbl
Panel GPI Enbl
Safe Title
FM V Frame Freeze Switch between frame-unit capture of video to frame memory
FM V Field Freeze
FM V Freeze Off
FM K Frame Freeze Switch between frame-unit capture of key to frame memory
FM K Field Freeze
FM K Freeze Off
SWR GPI ? Test
b)
Fire
Mcro Only Set
Mcro AT with Rate
Mcro AT with A/B
Device 1 to Device
6
Play
Stop
All Stop
Cue Up
Start TC
172
Other Settings
Function of command button
Enable and disable the switcher editor port.
Enable and disable all switcher GPI input ports.
Enable and disable all control panel GPI input ports.
Switch between output (On) and no output (off) of safe title
markers.
(On) and no capture (Off).
Switch between field-unit capture of video to frame memory
(On) and no capture (Off).
Switch between disable freeze capture of video to frame
memory (On) and enable freeze capture (Off).
(On) and no capture (Off).
Switch between field-unit capture of key to frame memory
(On) and no capture (Off).
Switch between disable freeze capture of key to frame
memory (On) and enable freeze capture (Off).
Execute test trigger output on the selected GPI output port.
Set macro attachment mode to Macro Only.
Save transition rate when registering a macro event, and
apply it as the transition rate when executing the event (only
when registering auto transition, key auto transition, or fade
to black).
Save A/B Bus cross-point settings when registering a macro
event, and apply them as A/B Bus cross-point settings when
executing the event (only when registering auto transitions).
Select devices to control. When several devices are
selected, the button pressed first selects the reference
device.
Execute play by the selected device, or when pressed
together with the Rec button, execute recording by the
selected device.
Stop play, recording, or cue up by the selected device
Stop play, recording, or cue up by all devices.
Cue up the selected device. When several devices are
selected, the button lights in green when the reference
device finishes cue up.
Set the timecode of the point where the button is pressed as
the start timecode of the selected device.
Button state
Not lit
a)
Lit
Enable Disable
On Off
Flashes during test –
fire execution
On Off
Selection (lights in De-selection
green for reference
device)
Executing play or Play or recording
recording over or stopped
Play, recording, or Executing play,
cue up is over or recording, or cue
stopped up, or executing jog
or shuttle search
Executing: Flashes –
once
Cued up: Flashes in
amber
Cue up over: Lights
in green
Executing: Flashes Stopped
Execution over:
Lights in green
Flashes during –
execution (beep also
output)