Table of Contents
Advertisement
Installation Guide Linear Motors
8 Storage, Transport, Installation Altitude
•
Sliders are to be stored and transported only in the plastic containers (with cardboard inlay) provided for
this purpose, or already installed and secured in LinMot P stators.
•
Remove the slider from this plastic containers only for assembling.
•
The storage area must be dry, dust-free, frost-free and vibration-free.
•
Prescribed storage temperature: -15 °C...70 °C
•
The motor must be protected against extreme weather conditions.
•
The air in the storage area must not contain any harmful gases.
•
The max. installation altitude is 4'000 m above sea level.
From 1'000 m, derating of 1 °C per 100 m is to be considered for air cooling.
9 Dimensions
9.1 Stator
9.1.1 PS01-23x80F-HP-SSCP-R20
NTI AG / LinMot
P01-23-HP-SSCP
ENG
in mm
Seite 21 / 30
Advertisement
Table of Contents
