Tolerance Of Tracking Of Pallet - Siemens SIMATIC MOBY D System Manual

Planning the MOBY D system
4.1 Fundamentals of application planning
4.1.7

Tolerance of tracking of pallet

Figure 4-7
Determining the width of the transmission window
The following approximation formula can be used for practical applications:
W:
L:
Figure 4-8
Tracking tolerance
The width of the transmission window (W) is particularly important for the mechanical
tracking tolerance.
32
Example ANT D5: Tolerance of tracking of pallet
Width of the transmission window in dynamic mode
Length of the transmission window
Formula: Width of the transmission window
System Manual, 01/2010, J31069-D0147-A6-7618
MOBY D