Mounting On Metal - Siemens SIMATIC MOBY D System Manual

5.5.3

Mounting on metal

CAUTION
Damage to the MDS due to improper mounting
For mounting with the spacer (6GT2690-0AA00), use a stainless steel M5 screw to avoid
damaging the MDS in high temperatures (expansion coefficients).
In higher temperatures (> +80 °C), observe the expansion coefficients of all materials in
order to prevent damage to the MDS due to fastening.
Figure 5-10
Figure 5-11
MOBY D
System Manual, 01/2010, J31069-D0147-A6-7618
Metal-free area for MDS D139
MDS D139: Mounting recommended with spacer
Mobile data storage units
5.5 MDS D139
111