Mounting Options - Siemens SIMATIC MOBY D System Manual

Note
If the minimum guide values (h) are not observed, a reduction of the field data results.
See also
Dimension drawing (Page 105)
5.3.4

Mounting options

Fixing pocket for MDS D100
The fixing pocket is secured on a non-metallic surface with M4 countersunk head screws in
the holes provided.
Figure 5-4
Note
The fixing pocket shown here with Order No.: 6GT2 390-0AA00 is not suitable for use with
the spacer (6GT2 190-0AA00).
Note
When mounting the MDS D100 on metal, it is also possible to use the 6GT2 190-0AB00
fixing pocket, but only in combination with the 6GT2 190-0AA00 spacer.
MOBY D
System Manual, 01/2010, J31069-D0147-A6-7618
Fixing pocket 6GT2390-0AA00 for MDS D100
Mobile data storage units
5.3 MDS D100
101